Fence

Fence permits depend on the city: height and front-yard location are what cities look at, and in Culver City every fence or wall needs Planning Division approval, regardless of height. Setback rules vary too, especially on corner lots, where a tall front fence can block sight lines. Buildda files the permit application and confirms setback and height limits with the local building department before fabrication. The permit fee is a passthrough paid to the city.

Most residential fence installations take 2-5 days on-site, depending on material, total linear footage, terrain, and weather. The schedule includes setting posts in concrete, which needs 24-48 hours to cure, then attaching rails and boards on a return visit. We provide a specific timeline at the consultation once we measure the run and confirm material availability.

Posts should be buried at least one-third of their total length, plus 6 inches of gravel for drainage at the base. For a 6-foot-tall fence with 8-foot posts, that means about 30 inches deep. We set all posts in concrete with the gravel layer underneath, which is the standard for maximum wind resistance and to prevent post heave during wet seasons.

Two approaches work for slopes. Stepped fencing installs each panel level, with each panel sitting a few inches higher or lower than the next; this looks crisp on moderate slopes. Racked fencing follows the slope continuously, with the rails and pickets parallel to the ground; this looks better on steeper grades. We recommend the right approach after walking the property at the consultation.

Yes, we can match most existing fence styles in material, height, picket spacing, and post spacing. We assess the neighboring fence during the consultation, including the rail design and any decorative caps, and quote a matching build. Material weathering means a brand-new section will look slightly newer for the first few years before the colors blend together visually.

The quoted price includes pressure-treated or cedar/redwood posts, rails, boards or panels, post concrete, hardware, gate hinges and latches, and professional installation. Old fence removal and disposal can be added as a line item. The price does not include permit fees (paid directly to the city) or major terrain work like grading, which are quoted separately when applicable.

Yes. Buildda provides a 2-year workmanship guarantee covering installation-related issues such as post-setting, rail fastening, and gate hardware. Materials carry their own manufacturer warranties against defects, which vary by product line. The combined coverage means installation issues during the workmanship window and material issues during the manufacturer window are both addressed end-to-end.

Cedar and redwood are the strongest choices for California. Both are naturally resistant to rot, insects, and the heat-and-dry-then-rain cycle that breaks down softwood pine over time. Redwood is the premium local option, with the longest lifespan but the highest material cost. Pressure-treated pine is the budget-friendly alternative and requires regular sealing to compensate for the lower natural resistance.