Skip to main content
Brick Walkway in Culver City
Real Culver City Project

Brick Walkway in Culver City

Licensed #11310885-Star Rated1-2 weeks

In Culver City: brick walkway projects typically run $5,000-$35,000 and take 1-2 weeks. Final numbers depend on scope, materials, and site conditions. Get a no-obligation on-site estimate for your address.*

*Ranges reflect recent Buildda projects in Los Angeles. Actual pricing and duration depend on the specifics of your home.

Real Project

Brick Walkway in Culver City: What We Did

The homeowner in Carlson Park called us about a backyard brick walkway that was falling apart. Every rainy season water pooled on it - the old path had no drainage plan, the base had failed, and years of settling had turned a beautiful old walkway into a slipping hazard. The whole backyard had a one-of-a-kind rusty, aged, organic character that the homeowner loved. Our job was to fix the function without losing that look.

Old failing brick walkway along side of Culver City home before Buildda replacement
The starting point. The existing brick path had been slipping for years - the base had failed, bricks had shifted, and every rainy season water stood on it. But the rusty, aged character was exactly what the homeowner loved. Our job was to rebuild the function without losing that look.

The first problem was the brick itself. The original bricks were weathered, mismatched, and decades old - the exact look that gave the backyard its character. We refused to use new brick that would stick out. Finding enough matching reclaimed brick in that specific rusty tone turned into a real hunt - we drove through 10-15 salvage and supply yards looking for the right batch. It took time, but we found bricks that blended perfectly with the original.

Old bricks stacked in Culver City backyard after Buildda removal and demolition
Demo in progress. We pulled up the failing walkway carefully and stacked the old bricks. Some were reusable, but we needed far more matching brick than the existing supply could give us.

Before we could lay a single brick, we had to fix what was underneath. A tree had been removed from that area years earlier, and the ground had been slowly settling as the old root mass decomposed. We brought in clean dirt, spread it in lifts, and compacted each layer so the walkway would sit on solid ground that would not sink in a year.

Forklift loading pallet of reclaimed bricks at LA area salvage yard for Buildda Culver City project
Forklift loading a pallet of reclaimed brick at a salvage yard. Finding the right rusty-toned brick to match a decades-old walkway meant visiting 10-15 yards across the LA area. New brick would have looked wrong next to the original.

We relocated sprinkler heads and adjusted the surrounding landscaping so the new walkway could follow a functional path without fighting the existing plants. Every head had to be mapped, capped, and re-run so irrigation still reached the plants after the walkway went in.

Tesla Model X trunk packed full of stacked reclaimed bricks sourced for Buildda Carlson Park project
When you find the right batch, you pack them however you can. Model X trunk floor-to-roof in reclaimed brick, protective plastic underneath. The hunt was the hard part - getting them home was the easy part.

The drainage fix was the centerpiece. Instead of the flat, failing grade we started with, we designed an organic slope - nothing you would notice walking on it, but enough that rain now runs off instead of pooling. We used a rotating laser level to check the grade across the whole run before any brick went down. Once the slope was right, we screeded a mortar bed, snapped string lines for alignment, and started laying.

Yellow DeWalt rotating laser level on tripod used by Buildda for drainage grading in Carlson Park walkway project
Our rotating laser level set up over the prepped path. We use this to verify the drainage slope across the full 300 sqft run - every brick has to sit on a grade that sheds water cleanly without being obvious underfoot.

We extended the walkway beyond its original footprint so walking through the yard is actually comfortable now - no more awkward narrow path. 300 square feet of reclaimed brick, laid tight, grouted, and finished to match the original aesthetic. Eight days on site from demo to final sweep.

Two Buildda crew members surveying drainage grade with laser level in Culver City backyard
Two of our crew checking the grade together across the prepared base. Teamwork matters here - one spots the laser, one confirms the height at each station. Miss by half an inch and water pools.

The finished walkway looks like it has always been there. That was the goal - not a brand-new walkway, but the backyard the homeowner already loved, working the way it should.

Buildda crew member in branded shirt working with laser level during Carlson Park walkway grading
Getting the grade right is not guesswork. A laser level, a methodical check across the run, and notes kept on every high and low point until the slope is consistent from end to end.
Buildda crew member in branded shirt pushing wheelbarrow of reclaimed bricks in Carlson Park backyard
Moving reclaimed brick into the staging area. We keep the bricks close to the work so installation flows without interruption - pick, lay, set, repeat.
Two Buildda crew members in branded shirts relocating sprinkler heads around cacti in Carlson Park backyard
Relocating sprinkler heads around the cactus bed. The original irrigation was under the walkway path - we capped, re-ran, and tested each head so the landscape still gets water after the bricks go in.
Buildda crew member raking prepared base before brick installation in Culver City backyard walkway
Raking the sub-base smooth before mortar goes down. The underlying ground had been settling for years because a tree had been removed from that spot and the root mass decomposed over time. We added clean dirt and compacted in lifts before rebuilding the base.
Mason guide strings above prepared mortar base ready for reclaimed brick walkway installation in Culver City
Mason strings stretched above the freshly screeded base. These guide every brick to the right height and alignment so the walkway reads straight even where the path follows a curve.
Buildda crew member installing reclaimed bricks in Carlson Park backyard walkway
Installation in progress. Each brick is set, tapped level, checked against the strings, and spaced consistently. Reclaimed brick has slight variation - that is part of what makes the finished path look authentic rather than manufactured.
Buildda crew laying reclaimed bricks in running bond pattern in Culver City backyard
Working the pattern out. With reclaimed brick you sort as you go - color variation, size variation, small chips - and place each one where it serves the whole path. Slow work, but the result is worth it.
Partially complete reclaimed brick walkway showing pattern emerging in Culver City backyard project
Partially complete walkway. Once the border course is set and the field starts filling in, the whole path starts to read. You can see the slight rusty tone variation across the reclaimed bricks - exactly the look we were after.
Completed reclaimed brick walkway curving through Carlson Park backyard toward Spanish-style home
The finished walkway sweeping through the backyard toward the Spanish-style home. 300 square feet of reclaimed brick, correctly graded for drainage, laid on a stable compacted base. The backyard kept its original character - the walkway just works now.
Close-up of finished reclaimed brick walkway pattern showing rust color variation in Carlson Park project
Close-up of the completed path. The rust, orange, and tan tones across the reclaimed bricks match the aesthetic the homeowner wanted to preserve. Up close you can see why sourcing the right brick mattered - this look does not come from a pallet of new material.
Finished reclaimed brick walkway leading to green door of Spanish-style Culver City home with cacti along side
Finished walkway leading to a green wooden door of the 1931 Spanish-style cottage. Succulents and cacti hold the bed line. The new path ties the home, the landscape, and the existing backyard character into one coherent piece.
Finished reclaimed brick walkway curving through backyard to patio area with umbrella in Carlson Park Culver City
Wider view of the finished walkway curving through the yard toward the patio. The walkway was extended beyond the original footprint so moving through the backyard is genuinely easier now. No pooling after rain, no shifting bricks, and the original rusty character preserved.

Buildda Tip

If your home is older and has an aged brick look, do not mix old and new brick in one walkway. New brick next to reclaimed brick reads as a mismatch no matter how carefully you blend them - different color saturation, different edge crispness, different aging. Either source all reclaimed to match, or replace the whole run with new brick. The hunt for matching reclaimed brick is worth the extra 1-2 weeks of sourcing time when character matters.

Culver City Properties

Brick Walkway for Culver City Homes

Median home

$1.45M

Typical lot

5,000-8,000 sq ft

Typical budget

$25K-$80K

Common style

Spanish Colonial Revival

We work on properties throughout Culver City, from homes near Sony Pictures Studios, Culver Hotel, Downtown Culver City, to projects in Downtown Culver City, Carlson Park, Fox Hills, Blair Hills, and beyond.

Culver City attracts entertainment and tech professionals, families seeking excellent schools. Vibrant Downtown dining and arts scene. Most properties are mix of 1920s-1950s homes and modern construction.

Brick Walkway in Culver City: Local Context

Culver City's housing stock leans toward Spanish Colonial Revival and Mid-century modern homes. Our brick walkway approach reads the architecture first and proposes finishes that match what the home is already saying.

Brick Walkway work in Culver City is permitted through Culver City BSD, with typical timelines around 2-4 weeks for standard projects. Online permit applications available. We pull permits, schedule inspections, and keep the paperwork trail in your project file.

Culver City's climate (coastal influence) shapes how we approach brick walkway. Year-round outdoor living with mild temperatures and ocean breezes. Practical implication for this work: low rainfall requires drought-tolerant landscaping.

Local conditions in Culver City we plan around: balancing privacy in dense neighborhoods and drought-tolerant landscaping requirements. We design the scope so these constraints are surfaced before contract, not discovered mid-project.

SL
Shiran Levy

Licensed General Contractor ยท CA #1131088 ยท Founder, Buildda Inc.

Share:WhatsApp

Last updated: April 2026. *Warranty terms and coverage vary by project scope and materials. Specific warranty details are provided in your project contract. Photos on this page may include stock or representative imagery. Actual project results vary.

Loading transformations...

Our Process

The Buildda Brick Walkway Process

1

Consultation & Brick Sourcing Plan

1-2 hours

We walk the site with you, discuss the walkway scope and the look you want. If reclaimed brick is the goal, we plan the sourcing approach before signing - matching old brick can take visits to 10+ salvage yards.

2

Brick Sourcing & Material Order

1-3 weeks

For new brick: we order from a supplier with lead times of 1-3 weeks. For reclaimed brick: we visit salvage yards across the LA area until we find a batch that matches your existing aesthetic. This is the step that takes real time on reclaimed work.

3

Demo & Site Preparation

1-2 days

We remove the existing walkway or ground cover, excavate to the proper depth (typically 6-8 inches), and address any settling from removed trees or old structures. Clean fill dirt is added and compacted in lifts if needed.

4

Drainage Grading

1 day

We set the grade for drainage using a rotating laser level. Slope is designed so water sheds off the walkway but the path feels level underfoot. This is the difference between a walkway that lasts and one that pools water.

5

Base Installation & Brick Laying

2-5 days

Compacted aggregate base goes down, followed by a mortar or sand setting bed. Mason guide strings stretched above the work keep alignment true. Each brick is set, tapped level, spaced against its neighbors, and cut to fit edges and curves.

6

Joint Fill, Sealing & Final Cleanup

1 day

Joints are filled with polymeric sand or mortar (your choice). Optional sealing protects the bricks and stabilizes the joints. We compact the finished surface, sweep excess material, and do a final walk-through with you.

Local Expertise

Brick Walkway Considerations for Culver City Homes

Climate Factors

Year-round outdoor living with mild temperatures and ocean breezes This makes Culver City ideal for brick walkway projects.

  • Mild year-round temperatures ideal for outdoor spaces
  • Marine layer provides natural cooling in summer
  • Low rainfall requires drought-tolerant landscaping
  • Mild year-round climate well-suited to patios, outdoor kitchens, and entertainment areas

Culver City Permit Requirements

Most brick walkway projects in Culver City do not require a building permit since it is considered routine maintenance. We always verify requirements for your specific project. Most residential brick walkways do not require a permit in LA County.

  • Most residential brick walkways do not require a permit in LA County
  • HOA approval may be required for front-yard installations
  • Historic-district properties may have additional design review requirements

Common Culver City Challenges We Solve

Older homes needing updates
Maximizing compact lots
Balancing privacy in dense neighborhoods
Drought-tolerant landscaping requirements

Architectural Style Match

Culver City features Spanish Colonial Revival, Mid-century modern, California bungalow, Contemporary homes, primarily from the Mix of 1920s-1950s homes and modern construction era. Respect historic character while embracing modern functionality

Our brick walkway designs complement these architectural styles while adding modern functionality and value to your property.

Learn More About Brick Walkway

Helpful resources to plan your project

FAQ

Brick Walkway FAQ for Culver City Homeowners

What is the difference between new brick and reclaimed brick?+
New brick comes from a supplier with uniform color and size - clean, modern look but no weathered character. Reclaimed brick is salvaged from demolished buildings or walkways - it has weathered color variation, subtle size differences, and the aged character that makes older homes feel authentic. Reclaimed brick typically costs more because sourcing takes more time.
How long does a brick walkway last?+
Properly installed brick walkways last 25-50+ years. Brick is one of the most durable walkway materials available. The key to longevity is base preparation and drainage - walkways fail from shifting base or standing water, not from the brick itself wearing out.
Can you match my existing brick if I want to extend or repair a walkway?+
In most cases, yes. We specialize in sourcing reclaimed brick to match the color and size of existing work. Depending on how unusual your existing brick is, we may need to visit 10+ salvage yards across the LA area to find a matching batch. This is the hardest part of a reclaimed-match project and the reason it takes longer than a new installation.
Do brick walkways need a permit in Culver City or LA?+
Most residential brick walkways in LA County and Culver City do not require a building permit. Exceptions: significant grading changes, work in the public right-of-way, or historic-district properties. HOA approval is often required for front-yard installations. We confirm permit needs with your local building department before any work begins.
How do you prevent water from pooling on the walkway?+
Every brick walkway we install is graded with a designed drainage slope, verified with a rotating laser level before bricks go down. The slope is typically 1-2% - subtle enough you do not notice walking on it, but enough that rain sheds off instead of pooling. For walkways with severe drainage issues, we may add a French drain or swale under the walkway.
How do you handle sprinkler heads and landscaping in the walkway path?+
We relocate sprinkler heads and adjust irrigation lines as part of the project. Each head that falls under the new walkway path is capped, re-run to a new location, and tested before we close the trench. Surrounding landscape plants are protected during construction with branded drop cloths or temporarily relocated when necessary.
What pattern options are available for brick walkways?+
Most common: running bond (staggered rows), basketweave (pairs of bricks rotated 90 degrees), and herringbone (angled interlocking). We can also do custom borders, circular insets, and mixed patterns where the walkway changes as it transitions between spaces. Reclaimed brick typically uses running bond or random patterns because size variation makes tighter geometric patterns harder.
How soon can I use my new brick walkway after installation?+
For walkways with polymeric sand joints: walk on it immediately, but avoid heavy pressure washing for 30 days. For walkways with mortar joints: we recommend 48-72 hours before walking on it, 7 days before any washing. We provide specific guidance at walk-through.
Can a brick walkway be installed over an existing concrete walkway?+
Sometimes, yes. If the concrete is in good condition and has proper drainage, brick can be installed over it using a thinset or mortar bed - this saves demo cost and reduces timeline. If the concrete is cracked, settling, or has drainage issues, demo and full rebuild is the right call. We assess this during consultation.
How do you handle settling from a tree I removed years ago?+
Very common - root mass decomposes over years and the ground sinks where the tree was. We address this by over-excavating the affected area, bringing in clean compactable fill dirt, and compacting in 2-inch lifts until the base is solid. Only then do we build the walkway base on top. Skipping this step is why so many walkways near old tree locations develop low spots.

Brick Walkway Terminology

Learn key terms to understand your project better

Browse full glossary

Related Services

Complete Your Brick Walkway Project

Many Culver City homeowners combine brick walkway with these complementary services.

Brick Walkway in Nearby Areas

Also providing brick walkway services in:

Proudly Serving All 16 Culver City Neighborhoods

Local experts for every corner of Culver City

Downtown Culver CityCarlson ParkFox HillsBlair HillsCulver CrestSunkist ParkMcManusLucerne-HigueraBlancoClarkdaleHargisJefferson+4 more

Serving zip codes: 90230, 90231, 90232

Pricing

Brick Walkway Cost in Culver City

Typical project range: $5,000 - $35,000

Standard New Brick

$20-$35 per sq ft

  • New brick pavers from supplier
  • Excavation and 4-inch base
  • Running bond or basketweave pattern
  • Polymeric sand joints

Best for: New walkway installations where aged look is not required

Premium New Brick

Popular

$35-$55 per sq ft

  • Premium brick with texture variation
  • Enhanced base preparation (6-inch+)
  • Complex patterns (herringbone, custom borders)
  • Laser-leveled drainage grading

Best for: Feature walkways where pattern and finish quality matter

Reclaimed Brick (Our Specialty)

$40-$65 per sq ft

  • Sourced reclaimed antique brick matching existing aesthetic
  • Multi-yard sourcing hunt to find the right batch
  • Color and size sorting for cohesive look
  • Heavy-duty base preparation

Best for: Older homes, Spanish / Craftsman architecture, backyards where you want a walkway that looks like it has always been there

Salvage Match + Restoration

$50-$80 per sq ft

  • Salvaging existing brick where reusable
  • Matching replacement brick sourced to fit
  • Full grading redesign for drainage
  • Ground rebuild if settling has occurred

Best for: Historic homes where a failing old walkway must be rebuilt without losing character

Prices vary based on project scope, materials, and site conditions.Call (310) 266-5744 for a no-obligation estimate.

Recent Buildda Activity

Project completed in Culver City - Culver City Driveway and Curb Drain (August 2026)
Project completed in Palms - Palms Siding, Sheathing and Six New Windows (July 2026)
Project completed in Culver City - Reclaimed Brick Walkway in Carlson Park (March 2026)

Get Started

Get Your Brick Walkway Quote in Culver City

Ready to start your brick walkway project in Culver City? Contact us for a no-obligation on-site consultation. We'll assess your property and provide a detailed estimate within 24 business hours.

Hours: Mon-Sat 8am-6pm
Response: Typically within 24 business hours
Area: Westside
Text us a photoWhatsApp